AC/DC | Enclosed- Enclosed Switching Power Supply

G3 Serie


G3 Series
Wattage :
15W~150W
Features :
  • Miniature size, non-PFC
  • 5G vibration, 70℃ operation
  • 300VAC input surge
  • Suitable for critical applications
  • 2 outputs are isolated for RID series
Model
Single:
RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
Dual:
RD-35 / RD-50 / RD-65 / RD-85 / RD-125 / RID-50 / RID-65 / RID-85 / RID-125
Triple:
RT-50 / RT-65 / RT-85 / RT-125
Quad:
RQ-50 / RQ-65 / RQ-85 / RQ-125

LRS Series


LRS Series
Wattage :
35W~350W
Features :
  • Non-PFC, most economical models
  • Ultra compact and 1U low profile
  • 300VAC input surge
  • No load power consumption: 0.2W~0.75W
  • 5G vibration, 70℃ operation
  • Operating altitude up to 5000 meters
  • Complete safety certificates: IEC/EN60335-1(PD3), IEC/EN61558-1, -2-16; IEC/EN/UL62368-1 and GB4943

SE Series


SE Series
Wattage :
100W~1500W
Features :
  • Non-PFC
  • Economical medium to high power models
Model:
SE-450 / SE-600 / SE-1000 / SE-1500

PFC Series


 PFC Series
Wattage :
150W~1000W
Features :
• Built-in active PFC function
• Full range input, complete functions
Model
Single:
PSP-600 / PSPA-1000
Quad:
QP-150 / QP-200 / QP-320

UHP Series


UHP Series
Wattage :
200W~2500W
Features :
  • Slim and Low profile
  • Fanless design,free air convection
  • Built-in active PFC function150%
  • peak load capability(100ms)
  • DC OK active signal and redundant function(option)
  • Operating altitude up to 5000 meter
  • LED indicator for power on

RSP-75~500 Series


RSP-75~500 Series
Wattage :
75W~500W
Features :
  • 1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm
  • Built-in constant current limiting circuit (RSP-75/100/150)
  • Built-in remote ON/OFF control (RSP-75/100/150/500)
  • Built-in remote sense (RSP-500 only)
Model:
RSP-75 / RSP-100 / RSP-150 / RSP-200 / RSP-320 / RSP-500

G5 Series


G5 Series
Wattage :
75W~1000W
Features :
  • Built-in active PFC function
  • High efficiency, no load power consumption <0.5W~0.75W
  • 5 years warranty

MSP Series


MSP Series
Wattage :
100W~1000W
Features :
  • Medical level, built-in active PFC
  • Medical safety approved (MOOP level)
  • High efficiency, no load power consumption<0.5W~0.8W
  • 5 years warranty
Model:
MSP-100 / MSP-200 / MSP-300 / MSP-450 / MSP-600 / MSP-1000

HEP Series


HEP Series
Wattage :
100W~1000W
Features :
  • 90~305VAC with PFC
  • Fanless design
  • High efficiency up to 96%
  • Wide working temperature range -55~+70℃
  • Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration
  • Operating altitude up to 5000 meters
  • Suitable for high/low temperature, high dust, high moisture, high vibration, high salt outdoor or harsh environment
  • 6 years warranty
Model
Single:
HEP-100 / HEP-150 / HEP-185 / HEP-240 / HEP-320 / HEP-480 / HEP-600 / HEP-1000

Peripheral


Peripheral
Wattage :
NA
Features :
  • 20A/40A Power Supply Redundancy Module
  • Supports system 1+1 and 1+N redundancyT
  • wo DC input contacts and single output
  • Built-in two channels DC OK relay contacts for monitoring power status
Model:
ERDN20 / ERDN40


AC/DC | DIN Rail- DIN Rail Power Supply

HDR Series


HDR Series
Wattage :
15W~150W
Features :
  • Plastic case, step shape
  • 1∅, full range input
  • Compact size, 1SU~6SU width (DIN EN43880)
  • Isolation class II
  • DC output voltage adjustable
  • No load power consumption <0.3W
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • Suitable for building automation and control of household appliance
Model:
HDR-15 / HDR-30 / HDR-60 / HDR-100 / HDR-150

ICL Series AC Inrush Current Limiter


ICL Series AC Inrush Current Limiter
Wattage :
NA
Features :
  • 180~264VAC input
  • Built-in thermal fuse and bypass relay
  • Operation temperature -30~+70℃
  • 2 installation options available:
  • DIN rail type ICL-16R/28R, can be installed on TS-35/7.5 or 15 DIN rails
  • Linear type ICL-16L/28L, can be installed on flat surface
Model
Din-Rail:
ICL-16R / ICL-28R
Linear Shape:
ICL-16L / ICL-28L

MDR Series


MDR Series
Wattage :
10W~96W
Features :
  • Plastic case, ultra slim
  • 1∅, full range input
  • No load power consumption<0.75W~1W
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • Built-in active PFC function
  • DC OK signal output (MDR-10/20)
  • DC OK relay contact (MDR-40/60/100)
  • Class I, Div 2 Hazardous Locations T4 (MDR-40/60)
Model:
MDR-10 / MDR-20 / MDR-40 / MDR-60 / MDR-100

DRA Series


DRA Series
Wattage :
40W~60W
Features :
  • Plastic case
  • 1∅, full range input
  • Io can be adjusted 10~100% by 1~10VDC, PWM signal or resistance
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • Suitable for machine vision inspection system and plant cultivation applications
Model:
DRA-40 / DRA-60

EDR Series


EDR Series
Wattage :
75W~150W
Features :
  • Metal case, low cost
  • 1∅, full range input
  • Slim size, model width: 32 ~ 40mm
  • EMC EN55022 class A
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • 2 years warranty
Model:
EDR-75 / EDR-120 / EDR-150

NDR Series


NDR Series
Wattage :
75W~480W
Features :
  • Metal case, economical models
  • 1∅, full range input
  • Slim size, model width: 32 ~ 85.5mm
  • EMC EN55022 class B
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • 3 years warranty
Model:
NDR-75 / NDR-120 / NDR-240 / NDR-480

SDR Series


SDR Series
Wattage :
75W~960W
Features :
  • Metal case, slim size
  • 1∅, full range input (230VAC only for SDR-960)
  • 94% high efficiency and complete functions
  • Built-in active PFC function (except SDR-75)
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • Built-in DC OK relay contact (except SDR-75)
  • 130%~150% peak load capability by models
  • Current sharing function (SDR-480P/960)
Model:
SDR-75 / SDR-120 / SDR-240 / SDR-480 / SDR-480P / SDR-960

TDR Series


TDR Series
Wattage :
240W~960W
Features :
  • Metal case, slim size
  • 3∅, 340~550VAC input
  • High efficiency up to 94.5%
  • Built-in active PFC function
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • Built-in DC OK relay contact
Model:
TDR-240 / TDR-480 / TDR-960

WDR Series


WDR Series
Wattage :
60W~480W
Features :
  • Metal case, slim size
  • 1∅ and 2∅ , 180~550VAC wide input
  • High efficiency up to 93%
  • Built-in active PFC function (240W & 480W)
  • Assemble on industrial rail TS-35 / 7.5 or 15
  • Built-in DC OK relay contact
Model:
WDR-60 / WDR-120 / WDR-240 / WDR-480

Peripheral


Peripheral
Wattage :
NA
Features :
  • 20A redundant module
  • 40A DC UPS module
  • 20A/40A DIN Rail Buffer Module
Model
Redundancy Module 20A:
DR-RDN20 / DRDN20
Redundancy Module 40A:
DRDN40
Buffer Module:
DBUF20 / DBUF40
UPS :
DR-UPS40

AC/DC | Open Frame- Open Frame Switching Power Supply

Industrial – On Board Type


Industrial - On Board Type
Wattage :
1W~90W
Features :
  • Assemble on the main PCB of the system
  • Miniature encapsulated type
  • No load power consumption<0.075W~0.1W
  • Working temperature:-30~+85℃ by models
  • Comply with EN55022 class B without any additional components
  • Various styles: PIN, SMD, Screw terminal style
Model:
IRM-01 / IRM-02 / IRM-03 / IRM-05 / IRM-10 / IRM-15 / IRM-20 / IRM-30 / IRM-45 / IRM-60 / IRM-90

Industrial – Green PCB Type


Industrial - Green PCB Type
Wattage :
15W~500W
Features :
  • 3″ x 2″, 4″ x 2″, 5″ x 3″ complete sizes for choice
  • PFC models: EPP, ELP series;
    Non-PFC models: EPS series
  • No load power consumption <0.1W~0.5W
  • Suitable for ErP regulated end systems
Model
2.5″ x 1.8″:
EPS-15
3″ x 2″:
EPS-25 / EPS-35 / EPS-45S / EPS-65S / EPP-120S
4″ x 2″:
EPS-45 / EPS-65 / EPS-120 / EPP-100 / EPP-150 / EPP-200
5″ x 3″:
EPP-300 / EPP-400 / EPP-500
Others:
ELP-75

Industrial – PCB Type


Industrial - PCB Type
Wattage :
5W~250W
Features :
  • PCB type, non-PFC for small wattage models
  • Multiple form factors for different installations: 7″ x 4.25”, 5” x 3”, 4” x 2”, slim type
Model
Single:
PS-05 / LPS-50 / LPS-75 / LPS-100 / LPP-100 / LPP-150
Dual:
PD-25 / PD-45 / PD-65 / RPD-65 / PD-110 / PID-250
Triple:
PT-45 / PT-4503 / PT-65 / PT-6503 / RPT-65 / PPT-125

Medical – On Board Type


Medical - On Board Type
Wattage :
5W~90W
Features :
  • Assemble on the main PCB of the system
  • Medical safety approved (2xMOPP)
  • Suitable for BF application with appropriate system consideration
Model
Encapsulated Type:
PM-05 / PM-10 / PM-15 / PM-20 / MPM-05 / MPM-10 / MPM-15 / MPM-20 / MPM-30 /MPM-45 / MPM-65 / MPM-90
PCB Type:
NFM-05 / NFM-10 / NFM-15 / NFM-20 / MFM-05 / MFM-10 / MFM-15 / MFM-20 / MFM-30

Medical – PCB Type


Medical - PCB Type
Wattage :
30W~500W
Features :
  • Compact size
  • PCB type, non-PFC for small wattage models
  • Medical safety approved (2xMOPP)
  • Low leakage current
  • Suitable for BF application with appropriate system consideration for selected models
Model
Single:
MPS-30 / MPS-45 / MPS-65 / MPS-200 / RPS-30 / RPS-45 / RPS-60 / RPS-65 / RPS-75 / RPS-120 / RPS-120S / RPS-160 / RPS-200 / RPS-300 / RPS-300-C / RPS-400 / RPS-500
Dual:
MPD-45 / MPD-65 / MPD-200 / RPD-60 / RPD-75
Triple:
MPT-45 / MPT-65 / RPT-60 / RPT-75 / RPT-160
Quad:
MPQ-200


AC/DC | Specific Purpose- Specific Purpose Power Supply

ATX PC Power


ATX PC Power
Wattage :
250W~300W
Features :
  • Low profile for 1U/2U for rack system
  • Suitable for industrial PC applications
Model:
IPC-300

Security-DIN Type


Security-DIN Type
Wattage :
40W~100W
Features :
  • With UPS function (need external batteries)
  • Suitable for security industry or battery backup systems
  • Assemble on industrial rail TS-35 / 7.5 or 15
Model:
DRC-40 / DRC-60 / DRC-100

Security-Enclosed Type


Security-Enclosed Type
Wattage :
35W~155W
Features :
  • With UPS function (need external batteries) for AD/ADD series
  • Suitable for security industry or battery backup systems
Model
Single:
SCP-35 / SCP-50 / SCP-75
Dual:
AD-55 / ADS-55 / AD-155 / ADS-155
Triple:
ADD-55 / ADD-155

Security-PCB Type


Security-PCB Type
Wattage :
35W~160W
Features :
  • With UPS function (need external batteries)
  • Suitable for security industry or battery backup systems
  • Built-in active PFC function (PSC-160)
  • Case available
Model:
PSC-35 / PSC-60 / PSC-100 / PSC-160

Moving Sign Series


Moving Sign Series
Wattage :
150W~400W
Features :
  • Light weight and low profile
  • Suitable for high efficiency moving sign applications
  • Conformal coating (HSP, HDP, NEL, HSN series)
  • Semi-potted and design against rain splash (ERP Series)
Model
Single Output with PFC:
LSP-160 / HSP-200 / UHP-200A / HSP-300
Single Output without PFC:
HSN-200 / HSN-300 / NEL-400 / LHP-200 / ERP-200 / ERP-350 / ERPF-400
Dual Output with PFC:
HDP-190 / HDP-240


AC/DC | PV Power- Programmable Power Supply

CSP Series


CSP Series
Wattage :
3000W
Features :
  • Full range 180~264VAC input
  • Built-in active PFC function
  • High efficiency up to 93%
  • Built-in DC fans for forced air cooling
  • Output voltage/current programmable
  • Active current sharing up to 9000W(2+1)
  • Built-in remote ON/OFF control /  Auxiliary power / power OK signal
  • Protections: short circuit/over current/over voltage/over temperature/ fan failure
  • 5 years warranty
Model:
CSP-3000

PHP Series Water-cooled


PHP Series Water-cooled
Wattage :
3500W
Features :
  • Water-cooled heat dissipation technology
  • Output voltage and constant current level programmable
  • Support PMBus communication protocol-md-4 (CANBus optional)
  • Support PSUs in parallel connection
  • Active current sharing, total system power up to 14000W (3+1)
  • Optional col-md-4d plate for quick implementation,ordering no.: HS-656

Model:
PHP-3500

DPU Series


DPU Series
Wattage :
3200W
Features :
  • Universal AC Input/ Full Range
  • Built-in Active PFC
  • High efficiency up to 94.5%
  • air cooling by built-in DC fan
  • Output voltage and constant current level programmable
  • Built-in OR-ing FET, support hot swap (hot) plug function
  • Protection: Short Circuit/ Overload / Over voltage/ Over temperature
  • Optional conformal coating
  • Safety approval: UL/TUV/EAC/CE/CB
  • 5 years warranty
Model
DPU-3200:
DPU-3200

SPV Series


SPV Series
Wattage :
150W~300W
Features :
  • Built-in active PFC function
  • Output voltage programmable from 20~110%
Model:
SPV-150 / SPV-300

RST Series


RST Series
Wattage :
5000W~10000W
Features :
  • Single output power supply with 5000W / 10000W high wattage
  • 3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC
  • Built-in active PFC function
  • High efficiency up to 91%
  • 20000W with built-in parallel (active current sharing) function
  • Output voltage and constant current level programmable
  • 5 years warranty
Model:
RST-5000 / RST-10000

RSP-750~3000 Series


RSP-750~3000 Series
Wattage :
750W~3000W
Features :
  • Programmable high power with active PFC function
  • Output voltage programmable
  • Constant current level Icc programmable (RSP-750/1600 only)
  • 1U low profile (41mm) : RSP-750/1000/1600/2000,
    2U profile : RSP-1500/2400/3000
  • Built-in current sharing (except RSP-750)
  • 5 years warranty


AC/DC | Rack Power- 19″ Rack Power Unit

RCP Series


RCP Series
Wattage :
1000W~18000W
Features :
  • Complete rack mountable front end solution: rectifier and charger
  • 1U low profile
  • 19 inch rack shelf available
Model
Power:
RCP-1000 / RCP-1600 / RCP-2000
Charger:
RCB-1600
Rack:
RCP-1U / RHP-1U / RKP-1U
Controller & Monitor :
RCP-MU / RKP-CMU1

DRP Series


DRP Series
Wattage :
3200
Features :
    • Complete rack mountable front end solution: rectifier and charger
    • 1U low profile
    • 19 inch rack shelf available
Model
Power:
DRP-3200
Shelf:
DHP-1UT
Charger:
DBR-3200


AC/DC  | Configurable- Modular Power Supply

NMP Series


NMP Series
Wattage :
650W/1200W
Features :
  • Configurable/customizable/flexible power supply
  • Built-in active PFC function
  • 4 slot output for NMP650
  • 6 slot output for NMP1K2
  • NMP Series Selection Tool
Model:
NMP650 / NMP1K2

UMP Series


UMP Series
Wattage :
400W
Features :
  • Fan-less, 1U design
  • Modular design, with DC-DC module cards (NID35/65/100 series models)
  • Can be used as a single rail PSU
  • wide operating temperature ranges from -30 ~ +70 ° C
  • Meet OVC III requirements
  • Meet 2x MOPP isolation requirements, ideal for BF rated medical equipment
Model:
UMP-400

MP Series


MP Series
Wattage :
450W/650W/1000W
Features :
  • Configurable/customizable/flexible power supply
  • Built-in active PFC function
  • 5 slot output for MP450/650,
    7 slot output for MP1k0
  • 75W/100W/150W/210W/300W/360W module available
Model:
MP450 / MP650 / MP1K0


AC/DC | LED Driver- LED Driver

AP Series


AP Series
Wattage :
8W~35W
Features :
  • 90~264VAC input
  • Rectangular plastic case with IP42 level
  • Class II design, without FG
  • Low cost, small and compact size
  • Constant voltage mode for APV series
  • Constant current mode for APC series
  • Suitable for indoor LED lighting and moving sign applications
Model
C.V.:
APV-8 / APV-12 / APV-16 / APV-25 / APV-35
C.C.:
APC-8 / APC-12 / APC-16 / APC-25 / APC-35

AP-E Series


AP-E Series
Wattage :
8W~16W
Features :
  • 180~264VAC input only
  • Rectangular plastic case with IP42 level
  • Class II design, without FG
  • Low cost, small and compact size
  • Constant voltage mode for APV-E series
  • Constant current mode for APC-E series
  • Suitable for indoor LED lighting and moving sign applications
Model
C.V.:
APV-8E / APV-12E / APV-16E
C.C.:
APC-8E / APC-12E / APC-16E

ELG Series


ELG Series
Wattage :
75W~300W
Features :
  • 100~305VAC input range
  • Metal case, IP67/IP65 design for indoor or outdoor installations
  • Function options:
    output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150 BE-Type)
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
  • Suitable for LED street lighting and outdoor LED lighting
  • 5 years warranty
Model
C.V.+C.C.:
ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240 /ELG-300
ELG-U:
ELG-100U / ELG-150U

ELG-C Series


ELG-C Series
Wattage :
75W~300W
Features :
  • 100~305VAC input range
  • Constant current (C.C.) output
  • Constant power (C.P.) output
  • Built-in active PFC function
  • No load/standby power consumption <0.5W
  • Metal case, IP67/IP65 design for indoor or outdoor installations
  • Function options:
    output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150-C BE-Type)
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
  • Suitable for LED street lighting and outdoor LED lighting
  • 5 years warranty
Model
C.C.:
ELG-75-C / ELG-100-C / ELG-150-C / ELGT-150-C / ELG-200-C / ELG-240-C
C.P.:
ELGC-300

FDL Series


FDL Series
Wattage :
65W~100W
Features :
  • 180~295VAC input range
  • Built-in active PFC function
  • Constant current design
  • Fully encapsulated with IP65 level (FDL-65)/IP67(FDLC-80)
  • No load power consumption <0.5W
  • 3 years warranty
Model
C.C.:
FDL-65
C.P. :
FDLC-80 / FDLC-100 / FDHC-100

GSC Series


GSC Series
Wattage :
18W~40W
Features :
  • 90~277VAC input, built-in active PFC function
  • Constant current mode
  • Fully isolated plastic case with IP40 design
  • Class II design, without FG
  • IEC320-C8 inlet for B type,
    2 pole EURO plug for E type
  • No load power consumption<0.15W
  • Suitable for indoor LED lighting
Model
IEC320-C8:
GSC18B / GSC25B / GSC40B
EURO 2Pin:
GSC18E / GSC25E / GSC40E

HBG(P) Series


HBG(P) Series
Wattage :
60W~240W
Features :
  • Circular shape design:
    HBG-60 : plastic case; HBG-100/160/240 : metal case; HBG-60P/100P/160P/240P : PCB type
  • 90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]
  • Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type
  • IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240
  • Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160P)/240(P) B type
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)
  • Suitable for LED high/low bay lighting, stage lighting and spot lighting5 years warranty

HLG Series


HLG Series
Wattage :
40W~600W
  • Features :
  • 90~305VAC input, built-in active PFC function
  • 96% high efficiency (HLG-600H)
  • Metal case, IP67/IP65 design for indoor or outdoor installations
  • Function options:
    output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
  • Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement
  • IP68/-55℃ startup/10G vibration options available (Please contact MEAN WELL for details)
  • 7 years warranty

HLG-C Series


HLG-C Series
Wattage :
70W~480W
Features :
  • 90~305VAC input, built-in active PFC function
  • Constant current output with high output voltage >60VDC
  • Metal case, IP67/IP65 design for indoor or outdoor installations
  • Function options:
    output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming; smart timer dimming
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)
  • Suitable for LED street lighting and outdoor LED lighting
  • 7 years warranty

HVG(C) Series


HVG(C) Series
Wattage :
65W~650W
Features :
  • Wide input range 180~528VAC
  • Metal case, IP67/IP65 design for indoor or outdoor installations
  • Built-in active PFC function
  • Function options:
    output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); timer dimming; smart timer dimming
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65/100)
  • Suitable for LED street lighting and outdoor LED lighting applications
  • 5 years warranty
Model
C.V.+C.C.:
HVG-65 / HVG-100 / HVG-150 / HVG-240 / HVG-320 / HVG-480
C.C.:
HVGC-65 / HVGC-100 / HVGC-150 / HVGC-240 / HVGC-320
C.P. :
HVGC-480 / HVGC-650 /HVGC-1000

LDB-L/LW Series


LDB-L/LW Series
Wattage :
300/350/500/600mA
Features :
  • Constant current DC/DC buck-boost LED driver
  • High efficiency up to 91%
  • Comply with EN55015 and FCC part 15 without additional input filter and capacitors
  • PWM dimming and remote ON/OFF control
  • Suitable for buck-boost type lighting systems (additional mother board is required)
  • Pin, wire style for choice
Model
Buck-boost:
LDB-L

LDH Series


LDH Series
Wattage :
350/500/700/1050mA
Features :
  • Constant current output DC/DC step-up LED driver
  • High efficiency up to 95%
  • Comply with EN55015 without additional any components
  • PWM+analog dimming and remote ON/OFF control
  • Suitable for boost type lighting systems (Additional mother board is required)
  • Pin, wire style for choice
Model
Step-up:
LDH-45(DA)

LP Series


LP Series
Wattage :
18W~150W
Features :
  • 90~264VAC input (except for 18W and 150W)
  • Slim plastic case with IP67 level
  • Economical design
  • Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)
  • -30~70℃ wide operation range
  • Suitable for economical LED lighting and moving sign applications
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)
Model
C.V.:
LPL-18 / LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100 / LPVL-150 / LPV-150
C.C.:
LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150

ODL Series


ODL Series
Wattage :
45W~65W
Features :
  • Constant current output mode  (ODLC Series)
  • Constant voltage output mode  (ODLV Series)
  • Flicker free design( ODLC Series)
  • Built-in active PFC function
  • Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
  • Suitable for indoor LED lighting applications
Model
C.C.:
ODLC-45(DA) / ODLC-65(DA)
C.V. :
ODLV-45 / ODLV-65

LDD-L Series


LDD-L Series
Wattage :
300/350/500/600/700mA
Features :
  • Constant current output DC/DC step-down converter
  • High efficiency up to 97%
  • Comply with EN55015 and FCC part15 without additional input filter and capacitors
  • PWM dimming and remote ON/OFF control
  • Protections: Short circuit / Over temperature
  • Cooling by free air convection
  • Fully encapsulated with IP67 level for pin and wire style
  • Suitable for driving illumination LED
  • 3 years warranty
Model
C.C:
LDD-L

LDD-H Series


LDD-H Series
Wattage :
300/350/500/600/700mA
Features :
  • Constant current output DC/DC step-down converter
  • High efficiency up to 97%
  • Comply with EN55015 and FCC part15 without additional input filter and capacitors
  • PWM dimming and remote ON/OFF control
  • Protections: Short circuit / Over temperature
  • Cooling by free air convection
  • Fully encapsulated with IP67 level for pin and wire style
  • Suitable for driving illumination LED
  • 3 years warranty
Model
C.C:
LDD-H / LDD-H-DA

DLP-04 Series


DLP-04 Series
Wattage :
4
Features :
  • 90~295VAC full range input
  • Slim design
  • Plastic case with class II
  • No load/standby power consumption<0.5w( type L)
  • Withstand 300VAC surge input for 5 seconds
  • -20~+60℃ working temperature
  • Protections: short circuit / over voltage
  • Dimension: DLP-04R : 35*90*54.5 mm (W*H*D)
    DLP-04L : 145*38*22 mm (L*W*H)
  • 3 years warranty
Model
Din Rail Type:
DLP-04R
Slim Type:
DLP-04L

LDC Series


LDC Series
Wattage :
35W~80W
Features :
  • Constant power output
  • Flicker free design
  • 3 in 1 dimming:0~10Vdc、PMW signal or resistance
  • Built-in active PFC function
  • No load power consumption <0.5W
  • working temperature: -25~+90℃
  • Protections: short circuit /
  • UL/ENEC/TUV/CCC/CB/CE certified
  • 5 years warranty
Model
C.P.:
LDC-55 / LDC-35 / LDC-80

XLG Series


XLG Series
Wattage :
25W~240W
Features :
  • Wide input range 100~305V AC
  • Constant power mode with adjustable output current
  • Built-in active PFC function and Efficiency up to 90%
  • Dimming functions with 3 in 1
  • Protections: Short circuit/Over voltage/Over temperature
  • Surge protection with 6KV(L/N-FG)/4KV(L-N)
  • 5 years warranty
Model:
XLG-25 / XLG-50 / XLG-75 / XLG-100 / XLG-150 / XLG-200 / XLG-240

XBG Series


XBG Series
Wattage :
100W~240W
Features :
  • Wide range 100~305VAC mains input
  • Circular shape with Patent Design(Patent No.CN201220314551) and Seal housing IP67
  • Built-in active PFC function and constant power mode
  • AC input cable with waterproof connector for flexible using
  • Surge protection: 6 KV /4KV
  • Protections: short circuit, over voltage, over temperature
  • Life time >50,000 Hrs. and 5 years warranty
Model:
XBG-100 / XBG-160 /XBG-240

 

SLD Series


SLD Series
Wattage :
50~80W
  • Features :
  • Wide input range 110~305V AC
  • Slim and linear housing design
  • Built-in active PFC function and efficiency up to 90%
  • Design with class 2/II and SELV
  • Protections: Short circuit/Over voltage/Over temperature
  • 3 years warranty
Model:
SLD-50 / SLD-80

LCM- BLE Series


LCM- BLE Series
Wattage :
40W~60W
Features :
  • Output driver current adjustable by dip switch
  • Plastic housing and class II design without FG
  • Built-in active PFC function and Efficiency up to 90%
  • Dimming functions with Bluetooth Mesh and Push input
  • Protections: Short circuit/Over voltage/Over temperature
  • Surge protection with 2KV(L-N)
Model:
LCM-25BLE / LCM-40BLE / LCM-60BLE

SLD Series


PLD Series
Wattage :
16W~60W
Features :
  • 16W: 90~135VAC or 180~295VAC
    25W: 90~295VAC
    40W/60W: 180~295VAC
  • Built-in active PFC function
  • Fully isolated plastic case with IP42 level
  • Class II design, without FG
  • Constant current mode
  • Suitable for indoor LED lighting
Model
C.C.:
PLD-16 / PLD-25 / PLD-40 / PLD-60

PLM Series


PLM Series
Wattage :
12W~40W
Features :
  • 110~295VAC input (180~295VAC input for E type)
  • Built-in active PFC function
  • Fully isolated plastic case with IP30 level
  • Class II design, without FG
  • Push terminal I/O
  • Constant current mode
  • No load power consumption<0.5W
  • Suitable for indoor LED lighting
Model
C.C.:
PLM-12 / PLM-25 / PLM-40(E)

OWA Series


OWA Series
Wattage :
60W~120W
Features :
  • IP67 design for power body
  • Class II design, without FG
  • 2 pole USA plug (U type)/ EURO plug (E type)
  • 90~264VAC input (180~264VAC input for OWA-120E)
  • No load power consumption <0.15W
  • Energy efficiency Level VI
  • E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP
    U-Type: comply with EISA 2007/DoE and NRCan
  • 5 years warranty
Model
USA 2Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2Pin:
OWA-60E / OWA-90E / OWA-120E

PCD Series


PCD Series
Wattage :
16W~60W
Features :
  • 16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
  • AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
  • Fully isolated plastic case with IP42 level
  • Built-in active PFC function
  • Class II design, without FG
  • Constant current mode
  • Suitable for indoor LED lighting
Model
C.C.:
PCD-16 / PCD-25 / PCD-40 / PCD-60

LPF Series


LPF Series
Wattage :
16W~90W
Features :
  • 90~305VAC input, built-in active PFC function (200~400VAC for LPFH-60/60D)
  • Fully isolated plastic case with IP67 level (16W optional)
  • Class II design, without FG
  • Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D & LPFH-60/60D)
  • Suitable for LED lighting and moving sign applications
  • 5 years warranty
Model
C.V.+C.C.:
LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPFH-60 / LPF-90
C.C. (3 in 1 Dimming):
LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPFH-60D / LPF-90D

NPF Series


NPF Series
Wattage :
40W~120W
Features :
  • 90~305VAC input, built-in active PFC function
  • Fully isolated plastic case with IP67 level
  • Class II design, without FG
  • No load/standby power consumption<0.15W (<0.5W for D type)
  • Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off ) for D type
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]
  • Suitable for LED lighting and moving sign applications
  • 5 years warranty
Model
C.V.+C.C.:
NPF-40 / NPF-60 / NPF-90 / NPF-120
C.C. (3 in 1 Dimming):
NPF-40D / NPF-60D / NPF-90D / NPF-120D

PWM Series


PWM Series
Wattage :
40W~120W
Features :
  • 90~305VAC input, built-in active PFC function
  • Fully isolated plastic case with IP67 level
  • Constant voltage PWM style output
  • Class II design, without FG
  • No load power consumption<0.5W
  • Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)
  • Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (PWM-40/60/120 only)
  • Suitable for LED strip lighting
  • 5 years warranty
Model
C.V.:
PWM-40 / PWM-60(DA) / PWM-90(DA) / PWM-120(DA)

PLC Series


PLC Series
Wattage :
30W~96W
Features :
  • 90~264VAC input, built-in active PFC function
  • Fully isolated plastic case with screw terminal style of I/O
  • Suitable for indoor LED lighting and moving sign applications
Model
C.C.:
PLC-30 / PLC-45 / PLC-60
C.V.+C.C.:
PLC-100

PLN Series


PLN Series
Wattage :
20W~96W
Features :
  • 90~295VAC input (90~277VAC for PLN-20), built-in active PFC function
  • Fully isolated plastic case with IP64 level
  • Suitable for indoor LED lighting and moving sign applications
Model
C.C.:
PLN-20 / PLN-30 / PLN-45 / PLN-60
C.V.+C.C.:
PLN-100

HLN Series


HLN Series
Wattage :
40W~80W
Features :
  • 90~305VAC input, built-in active PFC function
  • Fully isolated plastic case with IP64 level
  • Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type
  • User adjustable output voltage and current level for A type
  • Suitable for indoor LED lighting and moving sign applications
Model
C.V.+C.C.:
HLN-40H / HLN-60H / HLN-80H

LCM Series


LCM Series
Wattage :
25W~60W
Features :
  • 180~295VAC input for 40W/60W, 180~277VAC input for 25W
  • Constant current mode
  • Built-in active PFC function
  • Multiple-stage output current level selectable by DIP switch
  • Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
  • Built-in DALI interface and push dimming function for DA type
  • Suitable for indoor LED lighting applications
Model
3 in 1 Dimming:
LCM-25 / LCM-40(EO) / LCM-60(EO)
DALI Dimming:
LCM-25DA / LCM-40DA / LCM-60DA

LCM-U Series


LCM-U Series
Wattage :
40W~60W
Features :
  • 90~132VAC input only
  • Constant current mode
  • Built-in active PFC function
  • Multiple-stage output current level selectable by DIP switch
  • Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
  • Built-in DALI interface and push dimming function for DA type
  • Suitable for indoor LED lighting applications
Model
3 in 1 Dimming:
LCM-40U(EO) / LCM-60U(EO)
DALI Dimming:
LCM-40UDA / LCM-60UDA

IDL Series


IDL Series
Wattage :
25W~65W
Features :
  • Constant current output mode  (IDLC Series)
  • Constant voltage output mode  (IDLV Series)
  • Flicker free design  (IDLC Series)
  • Built-in active PFC function
  • Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
  • Suitable for indoor LED lighting applications
Model
C.C.:
IDLC-25 / IDLC-45(DA) / IDLC-65(DA)
C.V. :
IDLV-25 / IDLV-45 / IDLV-65

PLP Series


PLP Series
Wattage :
30W~60W
Features :
  • 90~264VAC input , built-in active PFC function
  • Suitable for built-in LED lighting systems
Model
C.C.:
PLP-30 / PLP-45 / PLP-60

IDP Series


IDP Series
Wattage :
25W~65W
Features :
  • Constant current output mode(IDPC Series)
  • Constant voltage output mode(IDPV Series)
  • Flicker free design(IDPC Series)
  • Built-in active PFC function
  • Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
  • Suitable for built-in LED lighting systems
Model
C.C.:
IDPC-25 / IDPC-45(DA) / IDPC-65(DA)
C.V. :
IDPV-25 / IDPV-45 / IDPV-65

HLP Series


HLP Series
Wattage :
40W~80W
Features :
  • 90~305VAC input, built-in active PFC function
  • Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance)
  • Suitable for built-in LED lighting systems
Model
C.C.:
HLP-40H / HLP-60H / HLP-80H


AC/DC | LED Accessory – LED Accessories

DAP-04


DAP-04
Wattage :
NA
Features :
  • 90~305VAC input
  • Convert DALI signal to PWM signal
  • 4 DALI addressable output channels
  • Meet DALI standards(IEC62386-101,102,207)
  • Suitable to use along with MEAN WELL’s AC/DC LED PSU with 3 in 1 dimming function
Model
DAP-04:
DAP-04

LED Strips

LED Strips
Wattage :
NA
Features :
  • 12V LED Strips
  • Uniform brightness, high stability
  • Tailored length per application demand

PIR-045


PIR-045
Wattage :
NA
Features :
  • Built-in Passive Infrared sensor module
  • MCU controller, no relay contact
  • Adjustable off-time delay / dimming level / sensitivity
Model
:
PIR-045

SDP-001


SDP-001
Wattage :
NA
Features :
  • Smart timer dimming programmer
Model:
SDP-001

SPD Series


SPD Series
Wattage :
NA
Features :
  • 10kA/20kA surge protection device
  • Line to Ground & Line to Line protected
  • Suitable for surge protection of LED drivers
  • IP66/67 design for indoor or outdoor installations
Model
20kA:
SPD-20 / SPD-20HP
10kA :
SPD-10-320S / SPD-10S-277S

WPD-06


WPD-06
Wattage :
NA
Features :
  • EnOcean wireless control technology
  • Easy installation and configuration
  • 6 protected and independent dimming output channels
  • Up to 128 wireless batteryless switches
  • Suitable for constant voltage lighting application
  • Up to 30 meter wireless distances
Model:
WPD-06


AC/DC | Adaptor- External Switching Power Supply

Industrial – Desktop (Level V)


Industrial - Desktop (Level V)
Wattage :
15W
Features :
  • Various DC Plug Converter available
  • Energy efficiency level VI
  • No load power consumption <0.075W
  • Comply with EISA 2007, NRCan, MEPS and ErP
  • 0~50℃ working temperature
  • A type: Class I (with FG), IEC320-C14;
    B type: Class II (no FG), IEC320-C8
  • 2 years warranty
Model
Class I:
GS15A
Class II:
GS15B

Industrial – Desktop (Level VI)


Industrial - Desktop (Level VI)
Wattage :
18W~280W
Features :
  • Various DC Plug Converter available
  • Global safety certificates for GST series :
    UL, TUV, PSE, RCM, KC, SIRIM, BIS, EAC, BSMI, CCC
  • Energy efficiency Level VI
  • No load power consumption <0.075W~0.5W
  • Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5
  • Fanless design with -30~+70℃ working temperature
  • A type: Class I (with FG), IEC320-C14;
    B type: Class II (no FG), IEC320-C8
  • 3 years warranty
Model
Class I:
GST18A / GST25A / GST40A / GST60A / GST90A / GST120A / GST160A / GST220A / GST280A
Class II:
GST18B / GST25B / GST36B
Triple:
GP25A / GP25B / GP50A

Industrial – Wall-mounted (Level VI)


Industrial - Wall-mounted (Level VI)
Wattage :
5W~60W
Features :
  • Various DC Plug Converter available
  • Energy efficiency Level VI
  • No load power consumption <0.075W~0.15W
  • Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
  • -30~+70℃ working temperature
  • 2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series
  • Slim design for SGA series
  • 3 years warranty
Model
Fixed (USA 2 Pin):
GS05U-USB / GS06U / GS15U / GST18U / GST25U / GST36U
Fixed (EURO 2 Pin):
GS05E-USB / GS06E / GS15E / GST18E / GST25E / GST36E
Slim (USA 2 Pin):
SGA12U / SGA18U / SGA25U / SGA40U / SGA60U
Slim (EURO 2 Pin):
SGA12E / SGA18E / SGA25E / SGA40E / SGA60E
Slim (CH 2 Pin):
SGA40CH
Interchangeable:
GE12I / GE18I / GE24I / GE30I / GE40I

Medical – Desktop (Level VI)


Medical - Desktop (Level VI)
Wattage :
18W~220W
  • Features :
  • Various DC Plug Converter available
  • Medical safety approved (2xMOPP), BF application(B type only)
  • Energy efficiency Level VI (GSM06/18/25/36/40/60 5~9V: Level V)
  • No load power consumption <0.1W~0.15W
  • Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
  • A type: Class I (with FG), IEC320-C14;
    B type: Class II (without FG), IEC320-C8
  • 3 years warranty
Model
Class I:
GSM40A / GSM60A / GSM90A / GSM120A / GSM160A / GSM220A
Class II:
GSM18B / GSM25B / GSM36B / GSM40B / GSM60B / GSM90B / GSM120B / GSM160B / GSM220B

Medical – Wall-mounted (Level V / Level VI)


Medical - Wall-mounted (Level V / Level VI)
Wattage :
6W~36W
Features :
  • Various DC Plug Converter available
  • Medical safety approved (2xMOPP), BF applications
  • Energy efficiency Level VI (GSM06/12 and GSM18/25/36 5~9V for Level V)
  • No load power consumption <0.075W~0.3W
  • Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC Version 5
  • 2 pole USA plug(U type)/EURO plug(E type) for GSM series, interchangeable type for GEM series
  • 3 years warranty
Model
Fixed (USA 2 Pin):
GSM06U / GSM12U / GSM18U / GSM25U / GSM36U / GSM60U
Fixed (EURO 2 Pin):
GSM06E / GSM12E / GSM18E / GSM25E / GSM36E / GSM60E
Interchangeable:
GEM06I / GEM12I / GEM18I / GEM30I / GEM40I / GEM60I

Moistureproof – Desktop


Moistureproof - Desktop
Wattage :
60W~120W
Features :
  • Various DC Plug Converter available
  • IP67 design for power body
  • Energy efficiency Level VI
  • No load power consumption <0.15W
  • E-Type: EU ErP and meet CoC Version 5 (OWA-60E/90E);
    U-Type: EISA 2007/DoE and NRCan
  • Class II (no FG)
  • 5 years warranty
Model
USA 2 Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2 Pin:
OWA-60E / OWA-90E / OWA-120E


AC/DC | KNX- KNX

KNX Power


KNX Power
Wattage :
20W~40W
Features :
  • EIB/KNX power supply with integrated choke
  • 1∅, 180~264VAC input
  • No load power consumption <0.5W
  • Assemble on industrial rail TS-35 / 7.5 or 15
Model
Power:
KNX-20E-640 / KNX-40E-1280

KNX to DALI Gateway


KNX to DALI Gateway
Wattage :
NA
Features :
  • KNX proof gateway
  • Easy configuration & installation
  • Connect up to 64 DALI drivers
  • Built-in DALI power supply
  • LCD 2×12 display
  • Lighting control via the button
  • Lighting control via the integrated web server
  • Up to 16 DALI lighting groups setting
  • Up to 16 DALI scenes setting
  • 3 year warranty
Model
Gateway:
KDA-64

KNX-USB Interface


KNX-USB Interface
Wattage :
NA
Features :
  • KNX-USB interface
  • No additional external power supply required
  • KNX commissioning, addressing and parameter settings
  • KNX protocol-md-4 and system visualization
  • Diagnostic operations
  • Long messages up to 220 byte APDU
  • 3 years warranty
Model
USB Interface:
KSI-01U

KNX IP Router


KNX IP Router
Wattage :
NA
Features :
  • KNX IP router
  • 4 IP/TP tunnelings
  • No additional external power supply required
  • Universal Plug and Play
  • Telegram filtering
  • Built-in web front-end page
  • 3 years warranty
Model
IP Router:
KSR-01IP

KAA-8R Switching Actuator


KAA-8R Switching Actuator
Wattage :
NA
Features :
  • 8 channel actuator in a compact size
  • Suitable for various and mixed applications
  • For AX, C-load, capacitive and inductive type of loads
  • Program via ETS5.0 software
  • Manual control via Push button
  • Programmable various time and scene function
  • 3 years warranty
Model
Actuator:
KAA-8R

KAA-4R4V Dimming Actuator


KAA-4R4V Dimming Actuator
Wattage :
NA
Features :
  • Dimming and switching LED driver and conventional electronic ballast
  • LED indicator for each channel
  • Linear or logarithmic dimming curve programmable via ETS software
  • Manual control via Push button on the panel
  • Programmable various time and scene function
  • 3 years warranty
Model
:
KAA-4R4V

KNX Line Coupler


KNX Line Coupler
Wattage :
NA
Features :
  • KNX TP Line Coupler/Repeater
  • Telegram filtering function
  • Long messages support up to 240 byte APDU
  • Trace the subline traffic
  • Diagnostic functions
  • Manual function
  • 3 years warranty
Model
:
KSC

LCM-KN KNX-LED Driver


LCM-KN KNX-LED Driver
Wattage :
25W~60W
Features :
  • Constant Current mode output with multiple levels selectable by dip switch
  • KNX protocol-md-4
  • Support emergency lighting (EL)
  • Integrated constant light output
  • Integrated KNX push button interface
  • Synchronization up to 10 units
  • Functions: Manual dim, operation hours, power consumption feedback, log/linear curve selection…etc
Model:
LCM-25KN / LCM-40KN / LCM-60KN

PWM-KN Series


PWM-KN Series
Wattage :
60W~120W
Features :
  • Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant IEEE 1789-2015 no risk
  • Built-in active PFC function
  • Standby power consumption<0.5W
  • Integrated KNX control protocol-md-4
  • No need KNX-DALI gateway
Model:
PWM-60-KN / PWM-120-KN


AC/DC | Charger- External Battery Charger

Stationary Charger


Stationary Charger
Wattage :
300W~1600W
Features :
  • Chargers for lead-acid and Li-ion batteries
  • 3-stage charging curve: PB-300/360, 2/3/8-stage charging curve: PB-600/1000, 3-stage charging curve suitable for harsh environment applications: HEP-600C
  • Intelligent charger with programmable 3-stage charging curve: RPB-1600/RCB-1600
  • 5 years warranty for RPB-1600/RCB-1600, 6 years warranty for HEP-600C
Model
3 stage :
PB-300 / PB-360
2/3/8 stage:
PB-600 / PB-1000
Harsh Environment:
HEP-600C
Programmable:
RPB-1600 / RCB-1600 / DBU-3200

Green Desktop Charger


Green Desktop Charger
Wattage :
120W~360W
Features :
  • ENP: Level VI power supply,
    ENC: 3-stage programmable charger for lead-acid batteries
  • Universal AC input/ Full range
Model
Power:
ENP-120 / ENP-180 / ENP-240 / ENP-360
Charger:
ENC-120 / ENC-180 / ENC-240 / ENC-360

Adaptor Charger


Adaptor Charger
Wattage :
30W~330W
Features :
  • Portable battery charger
  • Green adaptor with charging function
Model
Green :
GC30B / GC30E / GC30U / GC120 / GC160 / GC220 / GC330
Single:
PA-120 / PB-120

SBP-001


SBP-001
Wattage :
NA
Features :
  • Smart Battery Charging Programmer
  • Simple connection and configuration
  • No need of battery or AC power
  • LED status indicator
Model
:
SBP-001


AC/DC | Accessory – Mounting Accessories

DRL-01


DRL-01
Wattage :
Features :
  • Suitable for case : 903, 905, 931, 932, 971
Model:
DRL-01

DRL-02


DRL-02
Wattage :
Features :
  • Suitable for case : 901, 902, 906, 915, 916, 920
Model:
DRL-02

DRL-03A

DRL-03A
Wattage :
Features :
  • Suitable for case : 980, 987
Model:
DRL-03A

DRP-01


DRP-01
Wattage :
Features :
  • Suitable for case : 901, 902, 903, 906, 931, 932, 946
Model:
DRP-01

DRP-01A


DRP-01A
Wattage :
Features :
  • Suitable for case : 203, 205, 978, 999
Model
:
DRP-01A

DRP-02


DRP-02
Wattage :
Features :
  • Suitable for case : 905, 915, 916, 920, 928
Model:
DRP-02

DRP-03


DRP-03
Wattage :
Features :
  • Suitable for case : DRP-01, DRL-01~03
Model:
DRP-03

DRP-04


DRP-04
Wattage :
Features :
  • Suitable for case : 203, 205, 978, 999
Model:
DRP-04

MHS012


MHS012
Wattage :
Features :
  • Suitable for case : 206, 207, 912, 915, 916, 935, 939, 940, 977, 980, 982, 986, 987, 995
Model:
MHS012

MHS013


MHS013
Wattage :
Features :
  • Suitable for case : 919, 926
Model:
MHS013

MHS014


MHS014
Wattage :
Features :
  • Suitable for case : 212, 952
Model:
MHS014

MHS025


MHS025
Wattage :
Features :
  • Suitable for case : 910
Model:
MHS025

MHS026


MHS026
Wattage :
Features :
  • Suitable for case : 943
Model:
MHS026

MHS027


MHS027
Wattage :
Features :
  • Suitable for case : 971, 931
Model:
MHS027

DC/DC | Din Rail- Din Rail

DDR Series


DDR Series
Wattage :
15~480W
Features :
  • 2:1 or 4:1 wide input range
  • Fanless design, cooling by free air convection
  • Protections: short circuit / overload / over voltage / input reverse polarity / input under voltage
  • LED power indicator
  • Suitable for DIN rail types: TS-35/7.5 or TS-35/15
  • 4KVdc I/O isolation (reinforced isolation)
  • Ultra slim dimensions
  • 3 years warranty
Model:
DDR-15 / DDR-30 / DDR-60 / DDR-120 / DDR-240 / DDR-480

DDRH Series


DDRH Series
Wattage :
60W
Features :
  • 150~1500Vdc 10:1 ultra-wide input range
  • Potted with silicone gel, provides dust and moisture protection and free air convection cooling capability
  • -30~+80℃ ultra-wide temperature range ( >+55℃ de-rating)
  • Built-in DC OK relay contact
  • Protections: short circuit / overload / over voltage / over temperature / DC input under voltage / DC input reverse polarity
  • Adjustable output voltage (100~120%)
Model:
DDRH-60


DC/DC | Module Type- Module Type

Medical – SIP Package


Medical - SIP Package
Wattage :
1W~2W
Features :
  • SIP7 package with international standard pinout
  • Operating temperature range -40~ +90°C
  • Medical safety approved (1xMOPP/2xMOOP) according to ANSI AAMI ES60601-1
  • Low patient leakage current <2 μA
  • Protection: Short circuit(3 second max.)
  • 3 years warranty
Model:
MDS01 / MDD01 / MDS02 / MDD02

Medical- 2″ x 1″ Package


Medical- 2
Wattage :
15W~20W
Features :
  • 2″ x 1″ package with international standard pinout
  • Operating temperature range -40~ +90°C
  • Medical safety approved (2xMOPP according to ANSI AAMI ES60601-1)
  • Low patient leakage current <5 μA
  • 3 years warranty
Model:
MDS15 / MDS20

SMD Package


SMD Package
Wattage :
1W~2W
Features :
SMD type

Single and dual output models

Model
Single:
SBTN01 / SFTN01 / SFTN02
Dual:
DETN01 / DETN02

SIP Package


SIP Package
Wattage :
1W~9W
Features :
  • Regulated and unregulated models
  • ±10% or 2:1 wide input range
  • On board module type, assemble on the main PCB of the system
Model
Regulated :
SPR01 / SPA01 / SPA02 / SPB03 / SPB05 / DPAN02 / DPBW03 / SPBW03 / SPBW06 / DPBW06 / SPAN02 / SPB09 / DPB09 / SPRN01 / DPRN01
Unregulated :
SMU01 / SMU02 / SPU02 / SPU03 / SPU01 / DPU01

DIP Package


DIP Package
Wattage :
0.5W~3W
Features :
  • Regulated and unregulated models
  • ±10% input range
  • On board module type, assemble on the main PCB of the system
Model
Regulated :
SRS / SLC03 / DLC03
Unregulated:
SUS01 / SMA01

DIP – 1.25″ x 0.8″ Footprint


DIP - 1.25
Wattage :
3W~10W
Features :
  • DIP24 package
  • 2:1 (standard), 4:1 (option) wide input
  • 1~1.5KVDC (standard), 3KVDC (option) isolation
  • Single and dual output models
Model
Single:
SCW03 / SCW05 / SCW08 / SCW12 / SCWN03 / SCW20 / SCWN06 / RSDW08 / RSDW10
Dual:
DCW03 / DCW05 / DCW08 / DCW12 / DCWN03 / DCWN06 / RDDW08 / RDDW10

DIP – 1″ x 1″ Footprint


DIP - 1
Wattage :
15W~30W
Features :
  • DIP package
  • 1.5KVDC isolation
  • Single output models
  • Remote ON/OFF control, remote sense, trimming output ±10% by models
Model
Single:
SKM10 / SKMW06 / SKM10 / SKM15 / SKMW20 / SKMW30
Dual:
DKMW06 / DKM10 / DKMW20 / DKMW30

DIP – 2″ x 1″ Footprint


DIP - 2
Wattage :
5W~60W
Features :
  • DIP package
  • 2:1 (standard), 4:1 (option) wide input
  • 1~1.5KVDC (standard), 3KVDC (option) isolation
  • Single and dual output models
  • Remote ON/OFF control, remote sense, trimming output ±10% by models
Model
Single:
SLW05 / SKE10 / SKA15 / SKA20 / SKM30 / SKM50 / RSDW20 / RSDW40 / RSDW60
Dual:
DLW05 / DKE10 / DKA15 / RDDW20 / RDDW40 / RDDW60

DIP – 2″ x 2″ Footprint

DIP - 2
Wattage :
15W~60W
Features :
DIP package

2:1 (standard), 4:1 (option) wide input

1~1.5KVDC isolation

Single, dual and triple output models

 

Model
Single:
SKE15 / SDM30 / SKA40 / SKA60
Dual:
DKE15 / DKA30
Triple:
TKA30

Half-brick

Half-brick
Wattage :
75W~150W
Features :
Half-brick size (2.28” x 2.4” x 0.5”)

DIP package

2:1 wide input range, 1.5KVDC isolation

Built-in remote ON/OFF and remote sense

2.5V / 3.3V / 15V output available

Optional heat sink available

Model
:
MHB75 / MHB100 / MHB150

DC/DC | On Board Type – On Board Type

NID Series


NID Series
Wattage :
30W~100W
Features :
Non-isolated

3:1 wide input range

High efficiency up to 97%

Built-in remote ON/OFF control

Economical open frame design

Model
:
NID35 / NID65 / NID100

NSD Series


NSD Series
Wattage :
5W~15W
Features :
4:1 wide input range

1~1.5KVDC isolation by models

Built-in remote ON/OFF contro

Low cost, high reliability

Model
Single:
NSD05-S / NSD10-S / NSD15-S
Dual:
NSD10-D / NSD15-D


DC/DC | PCB Type – PCB Type

PSD Series


PSD Series
Wattage :
5W~45W
Features :
2:1 wide input range

1.5~2KVAC isolation by models

Model
:
PSD-15 / PSD-30 / PSD-45


DC/DC | Enclosed Type – Enclosed Type

RSD Series


RSD Series
Wattage :
30W~500W
Features :
Compliance with EN50155 and EN45545-2 railway standard

2:1 or 4:1 wide input range

Isolation: 4000VDC

1U low profile

Half encapsulated

Model
:
RSD-30 / RSD-60 / RSD-100 / RSD-150 / RSD-200 / RSD-300 / RSD-500

SD Series


SD Series
Wattage :
15W~1000W
Features :
2:1 wide input range (4:1 for SD-500/1000)

1.5~2KVAC isolation by models

1U low profile (41mm) for SD-1000

12V/0.25A auxiliary output for SD-500/1000

Built-in remote ON/OFF control and remote sense for SD-500/1000

Model
:
SD-15 / SD-25 / SD-50 / SD-100 / SD-150 / SD-200 / SD-350 / SD-500 / SD-1000


DC/AC | Modified Sine Wave

A301/302 Series


A301/302 Series
Wattage :
100W~2500W
Features :
Modified sine wave output, suitable for resistive load

Low cost

1 year warranty


DC/AC | True Sine Wave

TN Series


TN Series
Wattage :
1500W~3000W
Features :
True sine wave with solar charger & by-pass function

High surge power up to 200%

Output voltage / frequency adjustable

Conformal coating

Computer-based monitoring software, recommended for Windows 7 and Windows 8 Operating System (English and Chinese version)

3 years warranty

Model
:
TN-1500 / TN-3000

TS Series


TS Series
Wattage :
200W~3000W
Features :
True sine wave output, suitable for motor related applications

High surge power up to 200%

Output voltage / frequency adjustable

Conformal coating (except for TS-200/400)

3 years warranty

Model
:
TS-200 / TS-400 / TS-700 / TS-1000 / TS-1500 / TS-3000

IRC Series


IRC Series
Wattage :
Features :
Remote controller for TS-700~3000 , TN-1500~3000
Model
:
IRC1 / IRC2 / IRC3


DC/AC | Solar Inverter – Solar Inverter

ISI Series


ISI Series
Wattage :
500W
Features :
ISI-500: Modified sine wave with MPPT solar charger

ISI-501: True sine wave with MPPT solar charger

High surge power up to 200%

2 years warranty (ISI-500), 3 years warranty (ISI-501)

Model
:
ISI-501